Home - Resources - Chevrolet Recalls - 1990

Chevrolet Recall Lookup

Many vehicles have Chevrolet "factory-authorized" recalls where repairs can be completed at no charge to the customer. Check to see if your vehicle has any outstanding recalls, and schedule a service appointment to see if you qualify for a FREE repair.

If you would like to check on any Recall Notices announced by the NHTSA for your vehicle, please enter the appropriate year and model.

1990 Mazda Recalls

	NHTSA CAMPAIGN ID Number: 09E012000 Component: EXTERIOR LIGHTING Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 16270 Year: 1990 Make: Mazda Model: B2000 Manufactured    from: 0000-00-00    to: 0000-00-00 Recall Date: 2009-04-07 Summary: SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH. SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 09E012000 for my 1990 Mazda B2000. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 06E049000 Component: EXTERIOR LIGHTING Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 27176 Year: 1990 Make: Mazda Model: Pickup Manufactured    from: 0000-00-00    to: 0000-00-00 Recall Date: 2006-05-24 Summary: CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 06E049000 for my 1990 Mazda Pickup. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 06E026000 Component: EXTERIOR LIGHTING Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 61944 Year: 1990 Make: Mazda Model: Miata Manufactured    from: 0000-00-00    to: 0000-00-00 Recall Date: 2006-03-23 Summary: CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 06E026000 for my 1990 Mazda Miata. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 06E026000 Component: EXTERIOR LIGHTING Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 61944 Year: 1990 Make: Mazda Model: Pickup Manufactured    from: 0000-00-00    to: 0000-00-00 Recall Date: 2006-03-23 Summary: CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 06E026000 for my 1990 Mazda Pickup. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 97V211000 Component: SEAT BELTS:FRONT:WEBBING Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 134000 Year: 1990 Make: Mazda Model: 323 Manufactured    from: 1989-06-01    to: 1994-08-31 Recall Date: 1997-11-18 Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH FRONT SEAT AUTOMATIC SHOULDER BELTS. THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY CAN BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE. A SEAT OCCUPANT MAY NOT BE PROPERLY RESTRAINED IN THE EVENT OF A VEHICLE CRASH. DEALERS WILL REPLACE THE PASSIVE SHOULDER BELT ASSEMBLY WITH A MODIFIED ONE (WITH ADDITIONAL DUST LIP) IN VEHICLES WHICH HAVE EXPERIENCED A PROBLEM. IN VEHICLES IN WHICH THE AUTOMATIC SHOULDER BELT FUNCTIONS PROPERLY, THE RAILS WILL BE INSPECTED AND REPLACED WITH MODIFIED RAILS IF THEY EXCEED THE INSPECTION CRITERIA. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 97V211000 for my 1990 Mazda 323. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 96V173000 Component: SEAT BELTS:FRONT:WEBBING Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 17800 Year: 1990 Make: Mazda Model: Rx7 Manufactured    from: 1988-12-24    to: 1991-05-31 Recall Date: 1996-09-16 Summary: THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY WILL BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE. IN THE EVENT OF A VEHICLE COLLISION, THE OCCUPANT WOULD NOT BE ADEQUATELY RESTRAINED INCREASING THE RISK OF PERSONAL INJURY. DEALERS WILL REPLACE INOPERATIVE SHOULDER BELTS. MAZDA HAS EXTENDED THE WARRANTY COVERAGE ON THE DRIVER AND PASSENGER AUTOMATIC SHOULDER BELT RAIL AND MOTOR FOR THE LIFE OF THE VEHICLE. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 96V173000 for my 1990 Mazda Rx7. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 95V103005 Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 360433 Year: 1990 Make: Mazda Model: Mpv Manufactured    from: 0000-00-00    to: 0000-00-00 Recall Date: 1995-05-24 Summary: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY. THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH. OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 95V103005 for my 1990 Mazda Mpv. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 95V103005 Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 360433 Year: 1990 Make: Mazda Model: 929 Manufactured    from: 0000-00-00    to: 0000-00-00 Recall Date: 1995-05-24 Summary: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY. THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH. OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 95V103005 for my 1990 Mazda 929. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 93V174000 Component: STRUCTURE:BODY:DOOR Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 244000 Year: 1990 Make: Mazda Model: 626 Manufactured    from: 0000-00-00    to: 1991-08-31 Recall Date: 1993-10-29 Summary: RESIN MOLDED FRONT HANDLES FAIL AT THE DOOR LATCH ACTUATING ROD ATTACHMENT, FREEING THE ROD TO FALL INSIDE THE DOOR FRAME. SUBSEQUENT LOWERING OF THE ASSOCIATED WINDOW MAY FORCE THE ACTUATING ROD DOWNWARD AND RELEASE THE DOOR LATCH. INADVERTENT ACTUATION OF THE DOOR LATCH CAUSES THE DOORTO OPEN UNEXPECTEDLY WHICH COULD RESULT IN AN OCCUPANT FALLING OUT OF THEVEHICLE. DEALERS WILL REPLACE THE DOOR HANDLE/LATCH ASSEMBLY. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 93V174000 for my 1990 Mazda 626. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 93E035000 Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 300 Year: 1990 Make: Mazda Model: Mx6 Manufactured    from: 1991-09-01    to: 1992-03-01 Recall Date: 1993-10-13 Summary: THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED. IF THE RETAINING RING DOES NOT SIT CORRECTLY IN THEGROOVE, THE AXLE LUG NUTS WILL BREAK, CAUSING THE BRAKE DRUM, WHEEL, AND TIREASSEMBLY TO SEPARATE FROM THE VEHICLE. MIDAS SHOPS WILL REPLACE THE BRAKE DRUMS WITH OTHER BRAKE DRUMS FROM ANOTHER SUPPLIER. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 93E035000 for my 1990 Mazda Mx6. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 93E035000 Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 300 Year: 1990 Make: Mazda Model: 626 Manufactured    from: 1991-09-01    to: 1992-03-01 Recall Date: 1993-10-13 Summary: THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED. IF THE RETAINING RING DOES NOT SIT CORRECTLY IN THEGROOVE, THE AXLE LUG NUTS WILL BREAK, CAUSING THE BRAKE DRUM, WHEEL, AND TIREASSEMBLY TO SEPARATE FROM THE VEHICLE. MIDAS SHOPS WILL REPLACE THE BRAKE DRUMS WITH OTHER BRAKE DRUMS FROM ANOTHER SUPPLIER. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 93E035000 for my 1990 Mazda 626. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 92V159000 Component: UNKNOWN OR OTHER Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 109305 Year: 1990 Make: Mazda Model: Miata Manufactured    from: 1989-07-01    to: 1992-08-01 Recall Date: 1992-11-03 Summary: A HARDTOP HOIST ACCESSORY KIT WAS SOLD TO CUSTOMERS WHO HAVE THE MIATA WITH A HARDTOP. THE PLASTIC BUCKLES USED TO ADJUST STRAP TENSION CAN BREAK AFTER THE HARDTOP HAS BEEN SUSPENDED BY THE HOIST. THE BUCKLES ON THE HARDTOP HOIST CAN BREAK AND RESULT INTHE HARDTOP FALLING FROM THE HOIST, CAUSING PERSONAL INJURY TO ANYONE STANDINGBENEATH OR NEAR THE HARDTOP WHEN IT FALLS. MAZDA WILL REPLACE ALL HOISTS WITHOUT CHARGE. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 92V159000 for my 1990 Mazda Miata. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 92V027000 Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 95074 Year: 1990 Make: Mazda Model: Mpv Manufactured    from: 1989-06-01    to: 1991-06-01 Recall Date: 1992-02-27 Summary: THE REAR BRAKE LININGS CAN CHANGE OVER TIME. AS THE BRAKES WEAR, THE COEFFICIENT OF FRICTION CAN INCREASE, PRODUCING INCONSISTENT REAR BRAKE PERFORMANCE AND PREMATURE ACTIVATION OF THE ABS SYSTEM. INCONSISTENT BRAKING AND PREMATURE ACTIVATION OF THE ABSSYSTEM CAN CAUSE SUDDEN STOPS OR INCREASED BRAKING DISTANCES, AND RESULT ININCREASED RISK OF VEHICLE ACCIDENT. REPLACE THE REAR BRAKE ASSEMBLIES WITH ASSEMBLIES WHOSE FRICTION CHARACTERISTICS DO NOT CHANGE. THIS WILL REDUCE THE RISK OF PREMATURE ABS SYSTEM ACTIVATION. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 92V027000 for my 1990 Mazda Mpv. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

	NHTSA CAMPAIGN ID Number: 90E043002 Component: AIR BAGS:FRONTAL Manufacturer: MAZDA NORTH AMERICAN OPERATIONS Potential Number of Units Affected: 88 Year: 1990 Make: Mazda Model: Rx7 Manufactured    from: 1989-11-01    to: 1989-11-01 Recall Date: 1990-10-29 Summary: THREADED INFLATOR COMPONENTS MAY HAVE BEEN DAMAGED DURING ASSEMBLY WHICH MAY ALLOW COMPONENTS TO SEPARATE WHEN INFLATOR RECEIVES A SIGNAL TO DEPLOY THE AIR BAG. INFLATOR COMPONENT SEPARATION ALLOWS HOT COMBUSTION GASES TO ESCAPE INTO THE PASSENGER COMPARTMENT WHICH COULD RESULT IN INJURIES TO VEHICLE OCCUPANTS. REPLACE AIR BAG MODULES CONTAINING POTENTIALLY DEFECTIVE INFLATORS. Ask a Mechanic about this Recall Can you tell me more about NHTSA CAMPAIGN ID Number: 90E043002 for my 1990 Mazda Rx7. I found the recall at http://www.extendedchevroletwarranty.com/recalls/recalls.html  letters left

As a new car dealer, Vaden Automotive is authorized to sell Chevrolet Service Contracts by the General Motors Protection Plan (GMPP).

Vaden Automotive - 9393 Abercorn Street - Savannah, GA 31406
Service Contract Sales 1-877-466-9166

This Chevrolet Extended Warranty Web Site is intended solely for the purpose of providing general information with respect to Chevrolet vehicle service contracts (GMPP) aka Chevrolet extended warranties. You must refer to the actual GMPP vehicle service contract to obtain specific information about definitions; terms and conditions; coverages; benefits; claim instructions; exclusions; and special state requirements. See our Privacy Policy, Terms and Chevrolet Extended Warranty Disclosure.